Mercedes CLA Forum banner

Recent content by Mikecla

  1. Cylinder 2 misfire

    CLA Problems/Issues/Complaints
    One thing that does happen is as soon as I turn off the car and turn it back on it stops and runs perfectly fine
  2. Cylinder 2 misfire

    CLA Problems/Issues/Complaints
    Daaaamm... I'll try to run more tests later this week
  3. Cla250 heating help! Please!!!!

    CLA Problems/Issues/Complaints
    It is underneath the car it is covered by plastic it's going to be on your driver side close to the radiator
  4. Cylinder 2 misfire

    CLA Problems/Issues/Complaints
    So I switched them around same code no difference car still shakes like crazy
  5. Cylinder 2 misfire

    CLA Problems/Issues/Complaints
    Will do I'll try this today , thank you so much I'll let you know what happens
  6. Cla250 cylinder 2 missfire

    CLA General Discussion
    So already changed all my spark plugs Still missfiring Could it be my ignition coil on cylinder 2 Needs someone's opinion It was a lil white and brownish at the bottom when I pulled it out
  7. Cla250 diy thermostat replacement

    CLA Problems/Issues/Complaints
    Kinda but yea enjoyed seeing where all the parts are at
  8. Cla250 heating help! Please!!!!

    CLA Problems/Issues/Complaints
    Workks fine with the CLA first you let the electric pump work for like a min or 2 then you start the car all this with the cap off the expansion tank
  9. Cylinder 2 misfire

    CLA Problems/Issues/Complaints
    Alright I'm back now I have my cylinder 2 misfiring .. could it be my coil packs?? Already replaced my sparkplugs:mad:o_O
  10. Cla250 diy thermostat replacement

    CLA Problems/Issues/Complaints
    You only need to losen the top bolts of the manifold then just move to one side still inside the engine bay
  11. Cla250 diy thermostat replacement

    CLA Problems/Issues/Complaints
    See how it's right under the intake manifold super easy to remove
  12. Cla250 diy thermostat replacement

    CLA Problems/Issues/Complaints
    No drivebelts to be removed only intake manifold
  13. Cla250 heating help! Please!!!!

    CLA Problems/Issues/Complaints
    Nope I just filled the expansion tank half way turned the car on let it runs for 10min. Then I poured the rest and squeezed the top rad hose till bubbles stopped really only twice then it was ok she's running great
  14. Cla250 diy thermostat replacement

    CLA Problems/Issues/Complaints
    Thermostat circled in red Where intake manifold goes in gold
  15. Cla250 heating help! Please!!!!

    CLA Problems/Issues/Complaints
    No problem I wanted to post more pics but was so distracted on finishing the job
Top