Mercedes CLA Forum banner

Bought a carbon diffusor that doesnt fit lol

519 Views 18 Replies 5 Participants Last post by  kalbs
I waited two months for this to come in and the day it did I went to install it. It fits the car, goes on perfect BUT this is how the exhaust openings look. Obviously thats an issue and the stock the tips. They then told me I need to buy these exhaust tips from them to fit (which I did) but im not sure they are going to fit either. As for the protruding piece of the car thats visible in the exhaust opening, they recommended I cut it out to fit the exhaust. I have no clue what to do lol
Wood Table Dress Flooring Hardwood
Tire Automotive tail & brake light Photograph Wheel Vehicle
Hood Motor vehicle Automotive tire Bumper Automotive design
See less See more
  • Like
Reactions: 1
1 - 9 of 19 Posts
so just cut all the pieces that are shown in the exhaust opening? I have no problem with that as long as the new exhaust tips will fit. it just seems like the exhaust pipes are way lower then the opening of the diffuser
Awesome man thank you for your help. Also any tips on how you secured it on the car and the use of the 6 metal brackets?
that would be great, thank you!
Love these diffusers, need to take the dive on one myself 😬 You should have enough play in the exhaust to angle it after cutting the visible excess bumper away, just make sure it’s secure lol. Looks great on the car btw 🙌🏼
Hey thank you!
@Oyrivera97 @OhhBee just realized that the lower molding I took off the car when I first got it and threw away is needed to fit the carbon front splitter I got. Its $950 lol
The front molding that comes with the car is needed for the front splitter I also purchased. But I got rid of the front lower molding when I got the car lol
Tire Wheel Grille Vehicle Automotive tire
See less See more
Damn which one you got? I have this one but it’s all cracked I’m getting my front and back bumpers repainted and I’ll get a new front one lol View attachment 69436
I got the same exact one, except it won’t fit correctly because I don’t have the molding piece from the last picture I posted. So I’m trying to find one
That’s weird because I had to remove the one you showed me to install this one that I have on
Really? Isn’t there a huge gap on the bottom though?
1 - 9 of 19 Posts