Mercedes CLA Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
So my car started throwing a low boost code feels like no turbo when i reset the CEL or the pending CEL car would go back to normal this would happen every 300k Now it’s happening more frequently had the car at a local specialist shop he said i need a boost control sensor (which I thought it was too) had it replaced and within 20k of driving same code now it’s sitting in the guys shop since Monday 5 days and he can’t figure it out he says turbo is in spec he checked all the systems im taking my car back and going to bring it to Mercedes im pretty stumped on what it could be if it’s not a sensor or not an actual boost leak and the wastegate is fine and holding boots what do you guys think would love to hear some input thanks
 

·
Registered
Joined
·
2,263 Posts
.... im taking my car back and going to bring it to Mercedes im pretty stumped on what it could be if it’s not a sensor or not an actual boost leak and the wastegate is fine and holding boots....
........................
Welcome to the CLA Forum Tar21 :)
We hope the MB Diagnosis process provides the solution. Please come back here and let us know the outcome. Other members may have additional comments.
 
  • Like
Reactions: Tar21

·
Registered
Joined
·
1 Posts
[报价 = "Tar21,职位: 403790,成员: 31448"]
因此,当我重置CEL时,我的汽车开始抛出低增压代码,感觉就像没有涡轮增压,或者挂起的CEL汽车将恢复正常,这将每300k发生一次’发生了更常见的汽车在当地的专业商店,他说我需要一个升压控制传感器 (我认为它太) 如果它被替换了,现在驱动相同的代码不到20k’从周一5天开始坐在男人店里,他可以’我不知道他说涡轮增压是规格的他检查了所有系统,我把我的车拿回去,然后把它带到默西迪丝,我对它可能是什么感到困惑’不是传感器,也不是实际的增压泄漏,废气门很好,拿着靴子,你们认为希望听到一些输入吗?谢谢
[/报价]
嗨,我和你有同样的麻烦。涡轮增压突然不起作用,当我重新启动车辆时,它恢复了正常。我找不到解决办法。你解决了你的问题吗?你能给我一些建议吗?
 
1 - 3 of 3 Posts
Top