Mercedes CLA Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
I first discovered when i accelerate there was a jerly movement at around 4k rpm.. i read the thread on Crankshaft positioning sensor but the dealer said its still ok. They did a compression test and found out cyilnder 1 and 2 have low pressure. Anybody here has the same problem?

Automotive tire Motor vehicle Hood Automotive lighting Fender

Motor vehicle Vehicle Automotive tire Measuring instrument Gauge

Motor vehicle Automotive tire Light Automotive design Tire

Motor vehicle Light Vehicle Auto part Measuring instrument
 

· Registered
Joined
·
2,502 Posts
...They did a compression test and found out cyilnder 1 and 2 have low pressure. Anybody here has the same problem?...
Don't recall seeing this issue here before.
What is your mileage now?
Have you been changing the oil on a regular basis?
 

· Super Moderator
Joined
·
787 Posts
if its not smoking its more than likely carbon deposits on valves, as rings would give off smoke , could try getting some fuel additive or endoscope in inlet manifold to have look at valves
 
1 - 6 of 6 Posts
Top