Mercedes CLA Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
13,317 Posts
ouch

if the anchor clips did not snap off maybe just return the existing part to its original position (get a u hook and carefully pull out)

if any clips are busted and they are on the part then replace the part i suppose

hopefully no busted latching points in the bumper cover itself

looks like the mesh part is held against the bumper cover with those white latch arms?
 

·
Registered
Joined
·
2,352 Posts
Pop back in since doesn't look like the latch point is broken. Then the mesh crack area use super glue and then touch up with black paint. That should do it.
The damage looks pretty bad, if the car is fairly new, I would order a new cover and install it. Franke-steining it seems not the best way forward.

A bit of touch up is needed on the bumper too from the looks of it in the pic.
 
1 - 4 of 4 Posts
Top